Original item: One Only. The U.S. Model 1835 Musket was a .69 caliber smoothbore flintlock, with a 42-inch barrel and an overall length of 58 inches. It replaced the previous model 1822 musket, and often is viewed as a further development of that design. It was really only an incremental change, and many differences involved how the musket was produced, rather than the actual design. The emphasis was on making some interchangeable parts, and to use more accurate manufacturing methods. This paved the way for the later model of 1842, the first U.S. musket to have fully interchangeable parts.

The Model 1835 was produced by the Springfield Armory, Harpers Ferry Armory, and numerous other contractors. It was eventually superseded by the model 1840 and 1842 muskets, the former of which was originally made in Flintlock, but most were converted to percussion before they made it to the field. The 1842 was only made in percussion.

In the 1850s, many of the Flintlock Muskets in Arsenal were converted to Percussion, which was a much more reliable and water-resistant ignition system. This involved all variants of the Model of the 1816. This helped to standardize the types of ammunition carried by the soldiers in the field.

Later, the outbreak of the Civil War in the United States created a large need for percussion muskets, as the number of modern firearms currently on hand was far short of what was needed. To fill this need, many muskets converted to percussion in the 1840s-1850s were pressed back into service.

This example however looks to have escaped conversion during those times, and is offered in the original flintlock configuration. It is possible however that it is a re-conversion, as the flash pan is iron, and the frizzen spring is definitely a replacement. As best we can tell the hammer and frizzen are correct, and the barrel does not look to have been converted to percussion at any time.

The lock plate has the correct Federal EAGLE / U.S. in front of the hammer, and has the lock plate tail clearly marked SPRING / FIELD / 1836. Many of these muskets were produced under contract, however this example was made at the United States Armory and Arsenal at Springfield itself. The rifle side plate is bulged and not thin, typical of the Model 1835 Musket. Later iterations would move to a side plate without any bulge in the middle. The barrel nocks form still has V / P / Eagle's Head proof marks visible, and the 1837 date on the barrel tang is still clearly visible. There are two faded cartouches on the left side of the stock to the rear of the lock screws, however we are not able to read them.

There is a lovely lightly aged patina on most of the metalwork, showing a mottled look in many areas. It looks like the barrel and all metalwork was polished bright long ago, possibly during Civil War service, and since then has oxidized somewhat. The lock functions, holding correctly at half cock, and firing at full, however the mainspring is VERY strong, so care is needed. The bore was not rifled on this musket, and it shows light fouling and oxidation on the interior. Both sling swivels are present, and the cleaning rod is the correct type. The stock is in very good shape, with the expected wear and dents from service. There is a bit of cracking by the side plate on the left side, but no other issues we can see. It has a lovely grain and great aged patina.

A very nice example of a Model 1835 Springfield musket, in great shape and possibly converted back to flintlock. Definitely some great research potential here! Ready to display in any U.S. collection!

Specifications:-

Year of Manufacture: 1836 and 1837
Caliber: .69"
Cartridge Type: Ball and Powder
Barrel Length: 42 Inches
Overall Length: 57 1/2 Inches
Action type: Side Action Percussion Lock
Feed System: Muzzle Loading

History of the Model 1835 Musket:

The War of 1812 had revealed many weaknesses in American muskets. The Model 1812 Musket was created in an attempt to improve both the design and manufacture of the musket. The Model 1816 made further improvements, and replaced the Model 1812. The Model 1812 had borrowed heavily from the design of the French Charleville model 1777 musket, and this design was retained for the Model 1816. The Model 1816 had a 42 inch long .69 caliber smoothbore barrel, similar to the Model 1812, but had a longer lock plate, a shorter trigger guard, and a longer bayonet than the Model 1812. The Model 1816 also had a more straight lined stock. The overall length of the weapon was 58 inches.

The Model 1816 musket was originally produced at the Harpers Ferry and Springfield Arsenals between 1816 and 1844. Around 675,000 were made, more than any other flintlock in U.S. history.

The Model 1816 was originally produced as a flintlock musket. Like many flintlock muskets, many of these were later converted to percussion cap, as the percussion cap system was much more reliable and weather resistant.

This model of Springfield musket was used by Texans during the Texas Revolution and by the US Army and militia during the Mexican-American War. During this conflict, the flintlock version of the Model 1816 was preferred by U.S. regular forces, due to percussion cap supply concerns.

It was also used during the early years of the American Civil War until around 1862.

Many improvements to the Model 1816 were made, producing the Model 1822, Model 1835, Model 1840, and Model 1842. U.S. Ordnance Department referred to these as different models, but in other U.S. government documents they are referred to as a continuation of the Model 1816. Modern histories are similarly inconsistent in the nomenclature of these weapons.

NOTE: International orders of antique firearms MUST be shipped using UPS WW Services (courier). USPS Priority Mail international will not accept these. International customers should always consult their country's antique gun laws prior to ordering.