Original Item: Only One Available. This is an early Model 28 Leuchtpistole and not a later conversion model. This is of an all steel construction and not aluminum with original wooden checkered grips and the smaller trigger guard. Most of these LP28s went “under the knife” for use in WWII by the Wehrmacht.

As originally produced, this LP28 was made entirely of blued steel, had a set of checkered wood grips, and has a rather small trigger guard. This made for a relatively heavy flare pistol, which was hard to operate with a gloved hand, so changes were made for the next step in flare pistol evolution. ON THE UPGRADED LP28s: The frame and barrel were changed to anodized "Duralumin'' alloy, the grips changed to checkered bakelite, and the trigger guard enlarged. The internal mechanism was also simplified, removing the interrupter that prevented the breach from opening when the pistol was not cocked, which also prevented it from being dry fired when the breech was open. The result was the LP34.

This is a Walther Model 28 Leuchtpistole, which has undergone some but not all of the upgrades. As talked about, this LP28 is made entirely of blued steel with the smaller trigger guard, however it has black bakelite grips, and the interrupter was removed, so the breech can open at any time. The frame bears serial number 20082L, while the barrel is marked with serial 19697, so it was swapped out at some point, explaining why it shows more wear than the lower frame.

This example has the correct Walther Pre-War "Banner Logo" on the left side of the frame, along with the official name of the factory:

Waffenfabrik Walther Zella-Mehlis (Thür)
[WALTHER]

At the Walther factory individual parts were marked with the acceptance mark Eagle / 359, which can be seen on the trigger.

Until 1939, the test marks on the right side of the barrel consisted of B / S / U under an imperial crown, as well as "4" in a circle for the caliber and normally a spoked wheel, which is not present on this example, believed to symbolize approval of smooth-barrel weapons for the Zella-Mehlis region. The B / U under an imperial crown are repeated on the right side of the frame. From 1940 and onwards these are all replaced by an eagle over an upside down heart with a fir tree inside; the civil test approval mark for the region of Zella-Mehlis, Thüringia.

Overall condition is very good, though it does show wear from service, particularly on the replaced barrel. The threaded hole allowed the pistol could be mounted to a device that allowed remote firing from a nearby tree or fence, sometimes with a trip wire.

This is a seldom seen all steel LP28, which was not fully upgraded during the war. Ready to research and display!

Comes ready to display in your Pre-WWII and WWII Wehrmacht collections!

When Fritz Walther constructed the flare gun it was simply called “Leuchtpistole”. However, as time marches on, the veil of history has really complicated matters.

Collectors love to attach names to things and to categorize them, in order to distinguish models or versions from each other when the official name is unknown. The "Hebel" and the "Drückknopf" flare guns are typical collector’s "inventions".

As a flare gun for the commercial market it was called “Walther’s Leuchtpistole” to discern it from competitors, but it was also categorized in brochures as a "Signalpistole".

The name "Walther-Leuchtpistole" was printed in commercial brochures and advertisements in the 1930s, at least right up to the Geco catalog from 1937 (picture above). Directly translated it becomes "Light (illuminating) pistol", which refers to the original application area. As the use expanded over the years, it was more and more common to use the "Light pistol" to fire signals. But the word "Signal" was not used by the Wehrmacht to describe the flare gun; it only refers to the ammunition.

Reichswehr had little need to distinguish between models after the "Walther-Leuchtpistole" was acquired in the period 1926-1928, so they simply named it "Leuchtpistole", abbreviated "LP". This term was dominant in all military publications until the heir came into use; the "Leuchtpistole 42", abbreviated "LP42". In the new release of H.Dv. 409, published on July 1, 1943, the flare gun was referred to as "Leuchtpistole (Model Walther)", to distinguish between the "old" standardized flare gun and the new LP42. The only case where one needs to distinguish between the new flare gun (Leuchtpistole Model Walther) and the old flare gun (Leuchtpistole Model 1894) is when there is equipment or accessories that is not compatible. In this case, they are referred to as “Leuchtpistole a/A” and “Leuchtpistole n/A”, respectively. “a/A” and “n/A” means old and new version (alter Art and neuer Art).

All "models" of the Walther-Leuchtpistole, with the exception of Leuchtpistole Z, thus have the same designation in the Wehrmacht; "Leuchtpistole" This applies regardless of whether the flare gun has a long barrel, is manufactured in steel, Duralumin or in zinc. One does not distinguish between "editions", since the differences that occur over time are largely due to improvements or simplifications in the production of parts.

Post-war collectors in need of cataloging and separating «versions» from each other created all the names of the different versions of this flare gun, even though these "versions" were in reality the same product at different stages of a development that lasted from 1926 to 1943. Examples of fictitious collector terms are "M26", "LP26", "M34", "LP34", "Heer Model 1934", "Kriegsausführung", "Ausführung 1943" and "Zink Signalpistole Model Heer".

In the Wehrmacht supply system, Walther's flare gun had article number "N4002", and all parts for the flare gun were numbered in the same series. "4002" is, of course, only a serial number that was used to identify a complete flare gun, but "N" in this context is of interest.

This letter denotes "Nachrichtengerät", communication equipment, in the Wehrmacht supply system catalogue. In other words, the flare gun was not classified as a weapon, or infantry equipment, but as communication equipment.

The Luftwaffe appears to have been the only branch of the Wehrmacht that engraved the article supply number (N4002) on the left side of the steel frame on early issues of the long barreled Walther flare gun. The engraved number is "bare metal" in contrast to the rest of the frame that was "blued" at the factory. This clearly indicates that the N4002 marking was applied to the frame post-factory.

The Leuchtpistole ran parallel with the production for the commercial market, exports and production to other state and paramilitary organizations. It is relatively easy to distinguish these from one another by the marking. It is also worth noting that initial production for one organization does not necessarily mean that the flare gun did not end up with the other. There is a wide variety of markings, and sometimes a total lack of them.

Walther
From the start of production the flare gun was marked with the text “Waffenfabrik Walther Zella-Mehlis (Thür.)” over the manufacturer's trademark; a waving banner with the text "WALTHER". Zella-Mehlis is the city of Thuringia where the factory was located before and during the war. The company was "restarted" in Ulm post war.

In 1943, the production in Duralumin ends a bit into the "a" block, and the production of the frame and barrel resumes in steel in the same serial number series. The highest registered serial number in steel is 2817a. The production of the flare gun in zinc starts in 1943, and appears to be numbered from the start in a separate series.

At the Walther factory individual parts were marked with the acceptance mark WaA359. Until 1939, the test marks on the right side of the barrel consisted of B / S / U under an imperial crown, as well as "4" in a circle for the caliber and a spoked wheel, believed to symbolize approval of smooth-barrel weapons for the Zella-Mehlis region. The B / U under an imperial crown are repeated on the frame. From 1940 and onwards these are all replaced by an eagle over an upside down heart with a fir tree inside; the civil test approval mark for the region of Zella-Mehlis, Thuringia. The same mark is stamped on both barrel and frame. Waffenfabrik Walther also manufactured the Leuchtpistole for the commercial market or for other organizations. These flare guns initially had a five-digit serial number and later went to a five-digit serial number followed by the capital letter "L".

Flare guns from these deliveries may still have ended up with the other military or paramilitary organizations, but they are usually marked with additional Luftwaffe, Polizei or Kriegsmarine markings. A series of flare guns from Walther was also delivered to the Kriegsmarine without manufacturer markings or year of production at all.

The latest flare guns of this type manufactured by Waffenfabrik Walther were made of zinc with full pre-war marking (banner), five-digit serial number followed by an "L" and with the last type of wood grip plates. Walther's production for the Wehrmacht was marked the same way throughout the production with the serial number on the barrel just in front of and above the hole for the barrel pin, and on the frame just below the hole for the barrel pin.