Original item: One Only. The U.S. Model 1822 Musket was a .69 caliber smoothbore flintlock, with a 42-inch barrel and an overall length of 58 inches. It replaced the previous model 1816 musket, and often is viewed as a further development of that design. One of the most noticeable differences in the Model 1822 is the attachment of the lower sling swivel. The forward part of the trigger bow was provided with an enlargement which was drilled to receive the sling swivel rivet. Previously, the sling swivel had been affixed to a stud in front of the trigger bow.

The Model 1822 was produced by the Springfield Armory, Harpers Ferry Armory, and numerous other contractors. It was eventually replaced by the Springfield Model 1835, which is also considered by many to be a continuation of the Model 1816. These were sometimes referred to as "Whitney Flintlocks" due to the large number made in New Haven, Connecticut by Eli Whitney.

In the 1850s, many of the Flintlock Muskets in Arsenal were converted to Percussion, which was a much more reliable and water-resistant ignition system. This involved all variants of the Model of the 1816, and helped to standardize the types of ammunition carried by the soldiers in the field. The easiest conversion type, often referred to as the “Belgian” style conversion, was to simply tap a threaded hole in the top of the breach of the barrel to permit the fitting of a percussion cone (aka “nipple”). The lock had the frizzen and other external parts removed, and the pan mostly cut off. Many of these were then used during the Civil War by local militias, especially in the South, which did not have the same industrial capacity.

This example looks to originally have had a "Belgian" conversion, but then later had that hole plugged, and a "barrel" style bolster attached to the right side of the barrel, complete with a clean out. None of the brass components of the lock still remain. Looking at the bolster, we suspect it was added post civil war, probably to see further use as a fouling piece. The musket was originally manufactured at the United States Armory and Arsenal at Springfield itself in 1825, as indicated by markings on the tail of the lock plate:

There is also a clear Federal Eagle over U.S. on the lock plate in front of the hammer, which is crisp on the excellent condition lock plate. The smooth bore barrel has been shortened slightly from 42 to 41 ⅜ inches, probable to remove muzzle damage. We cannot see any remnants of the barrel date, but there are V / P proofs on the left side of the barrel.

This example is in very nice display condition, with a lovely patina showing decades of careful cleaning after a long service life. The lock is functional, however the tumbler is quite worn, so it will fire at half cock, and does not hold at full cock. The barrel and metalwork display a peppery patina, from many years of slow oxidation and subsequent cleaning. The cap nipple cone and bolster are in very good condition, showing a lot less powder burn than the surrounding areas, which is what leads us to believe it was replaced after the war.

The stock is in good shape, showing wear commensurate with long service in the field. There is no major damage, but it has definitely been worn down due to cleaning, particularly evident on the right side in front of the lock. It looks like any dents, chips, and slivers missing were sanded smooth. The walnut stock wood has a lovely red brown color, only achieved after decades. The original cleaning rod is still present along with both sling swivels, which move freely.

A very good example of an early stage in the evolution of the U.S. Musket, which saw further service by being converted to percussion, and was later updated to a more advanced percussion system. Ready to display!

Specifications-

Year of Manufacture: 1825
Caliber: .69"
Cartridge Type: Ball and Powder
Barrel Length: 41 ⅜ Inches
Overall Length: 57 Inches
Action type: Side Action Percussion Lock
Feed System: Muzzle Loading

History of the Model 1822 Musket:

The War of 1812 had revealed many weaknesses in American muskets. The Model 1812 Musket was created in an attempt to improve both the design and manufacture of the musket. The Model 1816 made further improvements, and replaced the Model 1812. The Model 1812 had borrowed heavily from the design of the French Charleville model 1777 musket, and this design was retained for the Model 1816. The Model 1816 had a 42 inch long .69 caliber smoothbore barrel, similar to the Model 1812, but had a longer lock plate, a shorter trigger guard, and a longer bayonet than the Model 1812. The Model 1816 also had a more straight lined stock. The overall length of the weapon was 58 inches.

The Model 1816 musket was originally produced at the Harpers Ferry and Springfield Arsenals between 1816 and 1844. Around 675,000 were made, more than any other flintlock in U.S. history.

The Model 1816 was originally produced as a flintlock musket. Like many flintlock muskets, many of these were later converted to percussion cap, as the percussion cap system was much more reliable and weather resistant.

This model of Springfield musket was used by Texans during the Texas Revolution and by the US Army and militia during the Mexican-American War. During this conflict, the flintlock version of the Model 1816 was preferred by U.S. regular forces, due to percussion cap supply concerns.

It was also used during the early years of the American Civil War until around 1862.

Many improvements to the Model 1816 were made, producing the Model 1822, Model 1835, Model 1840, and Model 1842. U.S. Ordnance Department referred to these as different models, but in other U.S. government documents they are referred to as a continuation of the Model 1816. Modern histories are similarly inconsistent in the nomenclature of these weapons.

NOTE: International orders of antique firearms MUST be shipped using UPS WW Services (courier). USPS Priority Mail international will not accept these. International customers should always consult their country's antique gun laws prior to ordering.