Original Item: Only one available. We just received this lovely Antique pistol, along with about 200 other guns, from a collection that sat in an attic for close to 100 years. This rifle is British manufacture, starting life in 1864 as a .577 caliber ENFIELD Percussion carbine model of P-1853. The lock plate stamped "CROWN" over V.R. and ENFIELD / 1864. The barrel has copious British markings and proof marks, which are present on other parts of the gun as well.

The wood butt retaining part of its original rondel cartouche, however it is not legible. The barrel has the rare five groove rifling and the bore shows clear lands and grooves, with just a bit of oxidation. There is the correct III stamped on top of the breech, indicating it is the MkIII version of the breech. The action works correctly, and the breech opens and locks, though it has a lot of grease in it, so it sticks a bit.

There are however some rather interesting aspects to this converted carbine. It has a butt trap, which looks to be for a two part cleaning rod. It also has a sling seivel on the butt, which looks almost like it came from a Martini-henry. there is a short leather sling permanently attached to the sling swivels. The front of the stock looks to have some type of resin nose cap.

Definitely an interesting Snider converted carbine, ready to display and research!

More on the P-1853 Rifle-Musket: The Enfield Pattern 1853 rifle-musket (also known as the Pattern 1853 Enfield, P53 Enfield, and Enfield rifle-musket) was a .577 calibre Minié-type muzzle-loading rifle-musket, used by the British Empire from 1853 to 1867, after which many Enfield 1853 rifle-muskets were converted to (and replaced in service by) the cartridge-loaded Snider-Enfield rifle.

The term "rifle-musket" originally referred to muskets with the smooth-bored barrels replaced with rifled barrels. The length of the barrels were unchanged, allowing the weapons to be fired by rank, since a long rifle was necessary to enable the muzzles of the second rank of soldiers to project beyond the faces of the men in front. The weapon would also be sufficiently long when fitted with a bayonet to be effective against cavalry. Such guns manufactured with rifled barrels, muzzle loading, single shot, and utilizing the same firing mechanism, also came to be called rifle-muskets.

The 39 in (99 cm) barrel had three grooves, with a 1:78 rifling twist, and was fastened to the stock with three metal bands, so that the rifle was often called a "three band" model.

History of the Snider rifle- Jacob Snider, an American from New York, developed this breech loading system for the P-1853 Enfield, the most prolific imported Percussion rifle in use by both the North and South during the U.S. Civil War. When the British Board of Ordnance appointed a Select Committee in 1864 the Snider system was swiftly adopted with the first breech loaders being issued in 1865 to British forces.

Improved in 1867 by the use of Colonel Boxer's center fire brass bodied cartridge, the rifle was used very effectively in the Abyssinian Campaign of 1868. The system utilized a hinged breech block with an internal firing pin assembly that permitted the use of a self contained cartridge of lead bullet in cardboard, and, after 1867, brass casing. This highly efficient conversion system prolonged the active life of the P-1853 rifles up until 1871 when the Martini System was adopted. Snider rifles saw continued use throughout the Empire but were officially obsoleted by the late 1880s.

Specifications: 

Year of Manufacture: 1864 - Converted Later
Caliber: .58 inches - 5 groove rifling
Ammunition Type: .577 Centerfire Cartridge
Barrel Length: 19 inches 
Overall Length: 37 1/4 inches
Action: Side Action Lock
Feed System: Side Hinge Rotating Breech block

NOTE: International orders of antique firearms MUST be shipped using UPS WW Services (courier). USPS Priority Mail international will not accept these.