Vintage Replica Item: Only One Available. This is a fantastic extremely high quality British Sterling L2A3 "Plug Fire" replica gun, made by the well-known Model Gun Corporation (MGC) of Japan. These work with replica "cartridges”, which have small caps "plugged" into the front of them, which are then detonated by the replica bolt. These were ejected like real spent cartridges, and could be reloaded with additional caps. Sadly the plugs and caps have all been lost, probably long ago somewhere in a backyard. This example does not have a serial number or any other markings other than MODELGUN CORPORATION MGC on the pistol grip around the securing screw.

This replica is in very good condition, with the original finish well retained on all the metalwork. It has been fitted with an original green Sterling sling, which still has the original markings. The gun looks to be complete, however for some reason the four bolts that secure the breech of the dummy barrel to the housing were removed, now stored in a bag. We also cannot cock the bolt at present, as it will not move back far enough.

This is a very nice replica and feels almost the same as the real thing! Great for reenactors and collectors alike. Sterling submachine guns with minor cosmetic alterations were used in the production of the Star Wars films as Stormtrooper blaster rifle props!

All purchases are sent and need an adult signature which is required by UPS. Priority Mail is not available for this item. You must be 18 years old to purchase this model and 21 to sign for the package.

Not available for export or shipment to certain U.S. locations. Plug Fire ONLY. Cannot be converted to a functional weapon. Please read legal information for safety guidelines prior to purchasing.

The Sterling submachine gun is a British submachine gun (SMG). It was tested with the British Army in 1944–1945 as a replacement for the Sten but it did not start to replace it until 1953. A successful and reliable design, it remained as standard issue with the British Army until 1994, when it began to be replaced by the L85A1 assault rifle.

In 1944, the British General Staff issued a specification for a new submachine gun to replace the Sten. It stated that the new weapon should weigh no more than six pounds (2.7 kg), should fire 9×19mm Parabellum ammunition, have a rate of fire of no more than 500 rounds per minute and be sufficiently accurate to allow five consecutive shots (fired in semi-automatic mode) to be placed inside a one-foot-square (30 cm × 30 cm) target at a distance of 100 yd (91 m).

To meet the new requirement, George William Patchett, the chief designer at the Sterling Armaments Company of Dagenham, submitted a sample weapon of new design in early 1944. The first Patchett prototype gun was similar to the Sten insofar as its cocking handle (and the slot it moved back and forth in) was placed in line with the ejection port though it was redesigned soon afterwards and moved up to a slightly offset position. The army quickly recognised the Patchett's significantly increased accuracy and reliability compared to the Sten and ordered 120 examples for trials. Towards the end of the Second World War, some of these trial samples were used in combat by airborne troops during the battle of Arnhem and by special forces at other locations in Northern Europe where it was officially known as the Patchett Machine Carbine Mk 1. For example, a Patchett submachine gun (serial numbered 078 and now held by the Imperial War Museum), was carried in action by Colonel Robert W.P. Dawson while he was Commanding Officer of No. 4 Commando, during the attack on Walcheren as part of Operation Infatuate in November 1944. Because the Patchett/Sterling can use straight Sten magazines as well as the curved Sterling design, there were no interoperability problems.

After the war, with large numbers of Sten guns in the inventory, there was little interest in replacing them with a superior design. However, in 1947, a competitive trial between the Patchett, an Enfield design, a new BSA design and an experimental Australian design was held, with the Sten for comparison. The trial was inconclusive but was followed by further development and more trials. Eventually, the Patchett design won and the decision was made in 1951 for the British Army to adopt it. It started to replace the Sten in 1953 as the "Sub-Machine Gun L2A1". Its last non-suppressed variation was the L2A3 but the model changes were minimal throughout its development life.