Item Description
Original Item: Only One Available. The Danes elected to license the Remington design for manufacture in Denmark at the Copenhagen arsenal, which they did in a fairly large quantity. The Danish model first utilized a rimfire cartridge and that stayed in service well into the smokeless era. However, with the adoption of the 8mm M1889 Krag-Jorgensen the need to update or abandon the Remington became acute. In 1896 they were withdrawn from infantry service, converted to centerfire cartridge and issued to coast and fortress artillerymen. At that time a new much longer rear ladder sight was also fitted to the rifles.
After World War II a large quantity were sold surplus back to the US where these type first entered civilian hands, being misleadingly sold in large quantity as .45-70 Rolling blocks!
This rifle features a 3.25" long backsight leaf. Left receiver flat is stamped with a Crown over the Danish Royal Cypher over the mark M-1867. The right receiver wall is bare and the upper tang is marked KJØBENHAVNS TOIHUUS 1884 (Copenhagen Arsenal) with serial number 65034 on the barrel. The same serial number is stamped into the rear stock between the trigger guard and rear swivel, though it is very light, as the stock has been refinished. The rifle bears the Danish Crown on the barrel, barrel bands, rear and front stock, and other components. There is also a rear stock disk, where regimental markings were sometimes added.
Condition of the rifle is very good, showing a nice patina of age typical of a well cared-for rifle. Most of the original metal finish is intact, with the expected wear. The wood appears to be refinished, but looks quite nice. The bore is excellent, with a bright finish and very clear lands and grooves. This rifle was used very little, if at all.
This particular rifle comes complete with the correct issue bayonet, a Yataghan-style saber bayonet of German manufacture. The ricasso of the blade is marked with GEBR. WEYERSBERG. SOLINGEN, the marking of Gebrüder Weyersberg, a maker in the legendary "City of Blades", Solingen, which existed from 1787-1883, when it merged with WR Kirschbaum & Cie to form Weyersberg Kirschbaum & Cie. This bayonet also has a leaf spring catch, and not a coil spring, indicating production prior to 1884. Along with the Danish Crown on the pommel, this is definitely the correct type of bayonet for this rifle. It is also marked on the cross guard with Danish regimental markings: 25B. 781, and bears serial number 53950 on the opposite side. The leather of the grips still shows the original checkering, though it is worn, and the leather has shrunk somewhat with age. The blade is in excellent condition, and the included scabbard just looks great. It mounts securely to the rifle, though does stick a bit when being installed.
Centerfire converted rifles chamber a cartridge near to the US Govt. .45-70, the 11.7x51R, a bit shorter and a bit larger. A .45-70 will function but will expand at the base and may overcrimp at the neck, not safe conditions. The rimfire cartridge was somewhat shorter but usable in the converted rifles. In fact, after conversion, the rifle could fire either rimfire or centerfire ammunition.
The Danish model first utilized a rimfire cartridge which stayed in service well into the smokeless era. This created a potential compatibility problem, rimfire cartridges won't fire in a central fire rifle, and center-fire cartridges won't operate in a rimfire rifle. However, if you look carefully, you will see that the breech block of the Danish Remington Rolling Block has two firing pin holes, one for center fire and one at the bottom of the breech block face for rimfire. The firing pin is fairly easily reversible, for use of the rifle with whatever (rimfire or central fire) ammunition is available.
The first 30,000 Danish Rolling Blocks were Danish built on Remington made actions. Thereafter they were constructed under license in Copenhagen, Denmark.
A fine rifle worthy of any Remington or Scandinavian collection.
Specifications-
Year of Manufacture: 1884
Caliber: 11x41.5mmRF or 11.7x51R
Cartridge Type: Rimfire Cartridge or Centerfire
Barrel Length: 35 Inches
Overall Length: 50.5 Inches
Action type: Rolling Breechblock External Hammer
Feed System: Single Shot
NOTE: International orders of antique firearms MUST be shipped using UPS WW Services (courier). USPS Priority Mail international will not accept these.
- This product is not available for shipping in US state(s): New Jersey
This product is available for international shipping.
- IMA considers all of our antique guns as non-firing, inoperable and/or inert. Title 18, U.S. Code, Section 921(a)(16) defines antique firearms as all guns made prior to 1899. This law exempts antique firearms from any form of gun control or special engineering because they are not legally considered firearms. No FFL, C&R or any license is required to posses, transport, sell or trade Antique guns. All rifles and muskets sold by IMA that were manufactured prior to 1899 are considered Antiques by the US BATF (United States Bureau of Alcohol, Tobacco & Firearms). Therefore, all of IMA's Antique guns may be shipped to all US States and most nations around the world.
These antique guns are not sold in live condition. They are sold as collector’s items or as wall hangers. Any attempt at restoring an antique gun to be operational is strongly discouraged and is done so at the risk of the customer. By purchasing an antique gun from IMA you thereby release IMA, its employees and corporate officers from any and all liability associated with use of our Antique guns.
Pre-1899 Manufacture, no licenses required, allowed to ship to almost any deliverable address across the globe. Please note that for international shipping, these MUST be shipped using UPS WW Services.
- Not eligible for payment with Paypal or Amazon
YOU MAY ALSO LIKE
