Original item: One Only. The U.S. Model 1822 Musket was a .69 caliber smoothbore flintlock, with a 42-inch barrel and an overall length of 58 inches. It replaced the previous model 1816 musket, and often is viewed as a further development of that design, called the "Model 1816 Type II". One of the most noticeable differences in the Model 1822 is the attachment of the lower sling swivel. The forward part of the trigger bow was provided with an enlargement which was drilled to receive the sling swivel rivet. Previously, the sling swivel had been affixed to a stud in front of the trigger bow.

The Model 1822 was produced by the Springfield Armory, Harpers Ferry Armory, and numerous other contractors. It was eventually replaced by the Springfield Model 1835, which is also considered by many to be a continuation of the Model 1816, the "Model 1816 Type III". These were sometimes referred to as "Whitney Flintlocks" due to the large number made in New Haven, Connecticut by Eli Whitney.

In the 1850s, many of the Flintlock Muskets in Arsenal were converted to Percussion, which was a much more reliable and water-resistant ignition system. This involved all variants of the Model of the 1816, and helped to standardize the types of ammunition carried by the soldiers in the field. The easiest conversion type, often referred to as the “Belgian” style conversion, was to simply tap a threaded hole in the top of the breach of the barrel to permit the fitting of a percussion cone (aka “nipple”). The lock had the frizzen and other external parts removed, the holes filled, and the pan mostly cut off. Many of these were then used during the Civil War by local militias, especially in the South, which did not have the same industrial capacity.

This nice patinated example still has the remnants of the brass pan intact on the lock plate, and was originally manufactured at the United States Armory and Arsenal at Springfield itself in 1832, as indicated by markings on the tail of the lock plate:

There is also a clear Federal Eagle over U.S. on the lock plate in front of the hammer, which is crisp on the very good condition lock plate. The 42" smooth bore barrel is faintly marked with V / P / Eagle's Head on the left top of the breech, the correct proof marks for this era. The lock plate and breech area have powder burn and past oxidation, which has made the markings faint. There are two faded oval inspection cartouches on the left side of the stock below the side plate, however they are unfortunately too worn to read.

The metalwork overall has a lovely worn patina from age and use, as well as subsequent cleaning. The lock is fully functional, holding at half cock and firing at full, though the hammer looks to have been bent to the left at some point. A washer was placed under it to correct this, but it still does not properly align with the cap nipple cone. The cone itself looks to be original but it is definitely worn from use and powder burn.

The stock is in very good shape with the usual scuffs and scratches from storage wear, but it still has a lovely color and looks great. It looks to have been varnished at some point, which really makes the grain "pop", though after that it did incur additional wear from storage. There is a small crack to the rear the lock plate but it doesn’t seem to be serious, and there is another running from the rear lock screw to the breech, a very common place for stress cracks. Both sling swivels are present, with the trigger guard swivel being rust frozen at present. The trumpet shaped ramrod is still present under the barrel.

A lovely patinated example of an early stage in the evolution of the U.S. Musket, which saw further service by being converted to percussion. Ready to display!

Specifications-

Year of Manufacture: 1832
Caliber: .69"
Cartridge Type: Ball and Powder
Barrel Length: 42 Inches
Overall Length: 57 1/4 Inches
Action type: Side Action Percussion Lock
Feed System: Muzzle Loading

History of the Model 1822 Musket:

The War of 1812 had revealed many weaknesses in American muskets. The Model 1812 Musket was created in an attempt to improve both the design and manufacture of the musket. The Model 1816 made further improvements, and replaced the Model 1812. The Model 1812 had borrowed heavily from the design of the French Charleville model 1777 musket, and this design was retained for the Model 1816. The Model 1816 had a 42 inch long .69 caliber smoothbore barrel, similar to the Model 1812, but had a longer lock plate, a shorter trigger guard, and a longer bayonet than the Model 1812. The Model 1816 also had a more straight lined stock. The overall length of the weapon was 58 inches.

The Model 1816 musket was originally produced at the Harpers Ferry and Springfield Arsenals between 1816 and 1844. Around 675,000 were made, more than any other flintlock in U.S. history.

The Model 1816 was originally produced as a flintlock musket. Like many flintlock muskets, many of these were later converted to percussion cap, as the percussion cap system was much more reliable and weather resistant.

This model of Springfield musket was used by Texans during the Texas Revolution and by the US Army and militia during the Mexican-American War. During this conflict, the flintlock version of the Model 1816 was preferred by U.S. regular forces, due to percussion cap supply concerns.

It was also used during the early years of the American Civil War until around 1862.

Many improvements to the Model 1816 were made, producing the Model 1822, Model 1835, Model 1840, and Model 1842. U.S. Ordnance Department referred to these as different models, but in other U.S. government documents they are referred to as a continuation of the Model 1816. Modern histories are similarly inconsistent in the nomenclature of these weapons.

NOTE: International orders of antique firearms MUST be shipped using UPS WW Services (courier). USPS Priority Mail international will not accept these. International customers should always consult their country's antique gun laws prior to ordering.